Call Route Setting On FTA5120

The following steps are for reference only, you can configure the route according to your needs:

• 1.Navigate to FXO -> Call Route;
• 2.Select an empty item, click “Edit”;
• 3.Fill in the name to identify the route for management, select “FXO_1”for origin, select “sip_trunk1” for destination, select “0”for priority;
• 4.Select another empty item, click“Edit”;
• 5.Fill in the name to identify the route for management, select “sip_trunk1”for origin, select “FXO_1” for destination, select “0”for priority;
• 6.Click “Save&Apply”.

Note：
1.For the detail of Call Route parameters, please navigate to “Web Interface Introduction -> FXO”. The setting here is for reference only.

Call Route Setting On PBX

Inbound Route Setting:

• 1.Navigate to Call Control -> Inbound Route, click“Add”;
• 2.Fill in the name to identify this route;
• 3.Select the trunk 6700(Created in the section 2.2.4), and move it to the “Slected ”blank;
• 4.Select IVR in the “Default Destination”,select a number for IVR (In Yeastar P series PBX, you need to configure one previously in Call Feature -> IVR.);
• 5.Click “Save”, and “Apply” the changes.

Outbound Route Setting:

• 1.Navigate to Call Control -> Inbound Route, click“Add”;
• 2.Fill in the name to identify this route;
• 3.Fill in “9.”in “Pattern”,“1”in Strip (When IP Phone dial 9+PSTN Number， it will be carry through this route, and the first number 9 will be removed to deliver correct PSTN number to the FXO port of FTA5120. );
• 4.Select the trunk 6700(Created in the section 2.2.4), and move it to the “Slected ”blank;

• 5.Select the extension/extension group in this route, for demonstration we select “Default AllExtensions”and move to “Selected”blank;

• 6.Select Always in “Time Condition -> Available Time”.
• 7.Click “Save”, and “Apply” the changes.

Note：
1.Please make sure that there is no conflict route on FTA5120 and your PBX, otherwise the function may work abnormally.
2.If you need to use two PSTN line, please create another group of Inbound and Outbound route that use different SIP Trunk and FXO port.