SAS Call Route
Route: SAS -> SAS Call Route
This page is used to edit the route for Emergency State or Local Networking Mode. For SIP Trunk to PBX, you need to set another route group to carry FXO call to the PBX.For the detailed configuration steps, please refer to the Configuration Steps
Parameter | Description |
---|---|
Name | Mandatory field, name of the route, unique identifier |
Origin | The Source interface of the call, you can configure SIP Trunk or FXO port |
Destination | The destination interface of the call, you can configure SIP Trunk or FXO port |
Dial Prefix | Number with the prefix will be forwraded by this route, available only in route that is to FXO |
Strip | Setting the number digits of the call prefix. e.g. When Dial Prefix is set to “89”, you need to set Strip=2 to remove the first two digit. This can be left blank if your PBX support Dial Prefix |
Priority | Select the priority of this route, 0 is the highest priority |
Changed Number | No require for this parameter |
Author:admin Create time:2023-12-01 16:04
Last editor:Albert Update time:2023-12-14 09:06
Last editor:Albert Update time:2023-12-14 09:06