The following table lists the parameters you can use to configure VPN.
Parameter | DBID_VPN_ENABLE |
---|---|
Description | It enables or disables the VPN feature. |
Permitted Values | 0-Disable 1-OpenVPN 2-L2TP 3-PPTP |
Default | 0 |
Web UI | Network > VPN > VPN Enable |
Parameter | OpenVPNTlSAuth |
---|---|
Description | It disable or enable TLS encryption authentication. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | Network > VPN > OpenVPN TLS Auth |
Parameter | DBID_VPN_USER |
---|---|
Description | It configures the user name of the VPN server. |
Permitted Values | String |
Default | Blank |
Web UI | Network > VPN > User Name |
Parameter | DBID_VPN_PWD |
---|---|
Description | It configures the password of the VPN server. |
Permitted Values | String |
Default | Blank |
Web UI | Network > VPN > Password |
Parameter | DBID_VPN_INITSRV_IP |
---|---|
Description | It configures the L2TP or PPTP server address. |
Permitted Values | IP Address |
Default | Blank |
Web UI | Network > VPN > Initial Service IP |
Parameter | DBID_VPN_DEFAULT_GW |
---|---|
Description | If it is enabled, the VPN network is used for transmission by default. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | Network > VPN > VPN As Default Route |
Author:admin Create time:2023-09-25 14:49
Last editor:admin Update time:2024-07-29 16:00
Last editor:admin Update time:2024-07-29 16:00