The Provision allows a device to automatically synchronize configurations to the IP PBX server or a specific configuration file. You can use HTTP, HTTPS, FTP, or TFTP to synchronize configurations.
After the phone has established network settings, it must discover a provisioning server to obtain software updates and configuration settings.
The IP phone supports the following methods to discover the provisioning server address:
PnP: PnP feature allows the phones to discover the provisioning server address by broadcasting the PnP
SUBSCRIBE message during startup.
DHCP: DHCP option can be used to provide the address or URL of the provisioning server to phones. When the IP phone requests an IP address using the DHCP protocol, the resulting response may contain option 66 (for IPv4) or the custom option (if configured) that contains the provisioning server address.
Static: You can manually configure the server address via the phone user interface or web user interface.
Parameter |
|
Description |
It triggers the provision feature to on or off. |
Permitted Values |
0-Disable 1-Enable |
Default |
0 |
Web UI |
Administration > Provision > Configuration Profile > Provision Enable |
Phone UI |
Menu > Advanced > Auto Provision > Provision Enable |
Parameter |
DBID_PRV_SIPPNP_ENABLED |
Description |
It triggers the Plug and Play (PnP) feature to on or off. |
Permitted Values |
0-Disable 1-Enable |
Default |
0 |
Web UI |
Administration > Provision > Configuration Profile > PNP Active |
Parameter |
DBID_RESYNC_ON_RESET |
Description |
It enables or disables the phone to reboot after auto provisioning, even if there is no specific configuration requiring a reboot. |
Permitted Values |
0-Disable 1-Enable |
Default |
1 |
Web UI |
Administration > Provision > Configuration Profile > Resync on Reset |
Parameter |
DBID_PRV_OPTION66_ENABLED |
Description |
It triggers the DHCP Active feature to on or off. |
Permitted Values |
0-Disable 1-Enable, the phone obtains the provisioning server address by detecting DHCP options. |
Default |
1 |
Web UI |
Administration > Provision > Configuration Profile > Option 66 |
Parameter |
DBID_PRV_OPTION67_ENABLED |
Description |
|
Permitted Values |
0-Disable 1-Enable |
Default |
1 |
Web UI |
Administration > Provision > Configuration Profile > Option 67 |
Parameter |
DBID_RESYNC_AFTER_UPGRADE |
Description |
If it is enabled, after the device is upgraded, the system synchronizes related IP phone configurations with the server again. |
Permitted Values |
0-Disable 1-Enable |
Default |
0 |
Web UI |
Administration > Provision > Configuration Profile > Resync after Upgrade |
Parameter |
DBID_RESYNC_RETRY_DELAY |
Description |
If the IP phone fails to synchronize server configurations, the IP phone tries to obtain the configurations again 3600 days later. |
Permitted Values |
Integer |
Default |
3600 |
Web UI |
Administration > Provision > Configuration Profile > Resync Error Retry Delay (sec) |
Parameter |
DBID_RESYNC_PERIODIC |
Description |
It configures the interval (in minutes) for the phone to perform auto provisioning repeatedly. |
Permitted Values |
Integer |
Default |
3600 |
Web UI |
Administration > Provision > Configuration Profile > Resync Periodic (sec) |
Parameter |
DBID_RESYNC_FROM_SIP |
Description |
It configures the IP phone behavior when receiving a SIP NOTIFY message which contains the header “Event: check-sync”. |
Permitted Values |
0-The phone will reboot only if the SIP NOTIFY message contains an additional string “reboot=true”. 1-The phone will reboot. 2-The phone will ignore the SIP NOTIFY message. |
Default |
1 |
Web UI |
Administration > Provision > Configuration Profile > Resync from SIP |
Parameter |
DBID_RESYNC_DELAY |
Description |
|
Permitted Values |
Integer |
Default |
1440 |
Web UI |
Administration > Provision > Configuration Profile > Forced Resync Delay (sec) |
Parameter |
DBID_RANDOM_DELAY |
Description |
|
Permitted Values |
Integer |
Default |
40 |
Web UI |
Administration > Provision > Configuration Profile > Resync Random Delay (sec) |
Parameter |
DBID_PRV_CONFIGFILE |
Description |
It configures the name of the auto profile. |
Permitted Values |
String |
Default |
$(MA) |
Web UI |
Administration > Provision > Configuration Profile > Config File Name |
To use the static provision method, you need to obtain the provisioning server address first when configuring a provisioning server.
The provisioning server address can be IP address, domain name or URL. If a user name and password are specified as part of the provisioning server address, they will be used only if the server supports them.
Parameter |
PrvUserAgentVal |
Description |
|
Permitted Values |
String |
Default |
Blank |
Web UI |
Administration > Provision > Configuration Profile > User Agent |
Parameter |
DBID_PRV_HTTP_AUTHENTRCATION |
Description |
It configures the type of authentication. |
Permitted Values |
Basic Digest |
Default |
Digest |
Web UI |
Administration > Provision > Configuration Profile > HTTP Authentication |
Phone UI |
Menu > Advanced > Auto Provision > HTTP Authentication |
Parameter |
DBID_PROFILE_RULE |
Description |
It configures the access URL of the provisioning server. |
Permitted Values |
String |
Default |
Blank |
Web UI |
Administration > Provision > Configuration Profile > Profile Rule |
Phone UI |
Menu > Advanced > Auto Provision > URL |
Parameter |
PrvUserName |
Description |
It configures the user name for provisioning server access. |
Permitted Values |
String |
Default |
The SN number of the IP phone |
Web UI |
Administration > Provision > Configuration Profile > User Name |
Phone UI |
Menu > Advanced > Auto Provision > User Name |
Parameter |
PrvUserPass |
Description |
It configures the password for provisioning server access. |
Permitted Values |
String |
Default |
The SN number of the IP phone |
Web UI |
Administration > Provision > Configuration Profile > Password |
Phone UI |
Menu > Advanced > Auto Provision > Password |
Parameter |
PrvUserAgentVal2 |
Description |
|
Permitted Values |
String |
Default |
Blank |
Web UI |
Administration > Provision > Configuration Profile2 > User Agent |
Parameter |
DBID_PRV_HTTP_AUTHENTRCATION2 |
Description |
It configures the type of authentication. |
Permitted Values |
Basic Digests |
Default |
Digest |
Web UI |
Administration > Provision > Configuration Profile2 > HTTP Authentication |
Parameter |
DBID_PROFILE_RULE2 |
Description |
It configures the access URL of the provisioning server. |
Permitted Values |
String |
Default |
Blank |
Web UI |
Administration > Provision > Configuration Profile2 > Profile Rule |
Parameter |
PrvUserName2 |
Description |
It configures the user name for provisioning server access. |
Permitted Values |
String |
Default |
The SN number of the IP phone |
Web UI |
Administration > Provision > Configuration Profile2 > User Name |
Parameter |
PrvUserPass2 |
Description |
It configures the password for provisioning server access. |
Permitted Values |
String |
Default |
The SN number of the IP phone |
Web UI |
Administration > Provision > Configuration Profile2 > Password |
Parameter |
DBID_UPGRADE_ENABLED |
Description |
It disable or enable the feature of obtaining firmware fromURL. If it is enabled, phone can obtain the upgraded firmware from the URL specified in the upgrade rule. |
Permitted Values |
0-Disable 1-Enable |
Default |
1 |
Web UI |
Administration > Provision > Firmware Upgrade > Enable Upgrade |
Parameter |
DBID_UPGRADE_RETRY_DELAY |
Description |
It configures the delay time of obtaining the firmware again after failing to obtain the firmware automatically. |
Permitted Values |
Integer |
Default |
3600 |
Web UI |
Administration > Provision > Firmware Upgrade > Upgrade Error Retry Delay (sec) |
Parameter |
DBID_UPGRADE_RULE |
Description |
It configures the URL of the firmware file. |
Permitted Values |
String |
Default |
Blank |
Web UI |
Administration > Provision > Firmware Upgrade > Upgrade Rule |
Author:admin Create time:2023-09-20 22:13
Last editor:admin Update time:2024-07-29 16:00