The following table lists the parameters you can use to configure the SIP advanced feature.
Parameter | DBID_SIP_USE_OBSERVER_IN_DIALOG |
---|---|
Description | It enables or disables the request header to display the registered domain name. |
Permitted Values | 0-Disabled, the IP address will be displayed in the request header of sip messages. 1-Enabled, the registered domain name will be displayed in the request header of sip messages. |
Default | 1 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Domain Name Type |
Parameter | DBID_SIP_HOSTPORT_ENABLE |
---|---|
Description | It enables or disables the port to display next to the IP address in the from/to fields of the Request and Message Header of sip messages. |
Permitted Values | 0-Disabled, the IP address will not be displayed in the from/to fields of the Request and Message Header of sip messages. 1-Enabled, the IP address will be displayed in the from/to fields of the Request and Message Header of sip messages. |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Carry Port Information |
Parameter | DBID_SIP_LOCAL_PORT |
---|---|
Description | It configures the port of the IP phone. Tips: It will be displayed in the Via and contact fields of sip messages. |
Permitted Values | Integer from 0 to 65535 |
Default | 5060 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Signal Port |
Parameter | DBID_SIP_CALLID_PREFIX |
---|---|
Description | |
Permitted Values | Integer |
Default | Blank |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Call-ID Prefix |
Parameter | DBID_SIP_CALLER_ID_HEADER |
---|---|
Description | It configures the identity of the caller. |
Permitted Values | 0-FROM 1-PAID 2-PAID-FROM 3-RPID-PAID-FROM 4-PAID-RPID-FROM 5-RPID-FROM |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Caller ID Header |
TIPS:PAID(P-Asserted-Identity) RPID(Remote-Party-ID)
Parameter | DBID_ONLY_SEND_UNREG_BEFORE_REBOOT |
---|---|
Description | If enable it, phone will send a register package that removes the last registration information when it restarts or registers. |
Permitted Values | 0-Enable 1-Disable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Unregister When Reboot |
Parameter | DBID_SIP_PING_ENABLE |
---|---|
Description | It enables or disables the phone to send keep-alive packets. |
Permitted Values | 0-Disabled 1-Enabled |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Enable SIP OPTIONS |
Parameter | DBID_SIP_INIT_REG_WITH_AUTHORIZATION |
---|---|
Description | It enables or disables the first REGISTER package to carry registration information. |
Permitted Values | 0-Disabled 1-Enabled |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Initial Reg With Authorization |
Parameter | DBID_SIP_CALLQUEUED_ENABLE |
---|---|
Description | It enables or disables the IP phone TO respond with a 182 queued message. Note: It works only if “DBID_SIP_CALLWAITING_ENABLE” is set to 1. |
Permitted Values | 0-Disabled 1-Enabled |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Reply 182 On Call Waiting |
Parameter | DBID_PRIMARYSER_DETECT_INTERVAL |
---|---|
Description | It configures the time to detect the online status of the primary server. For example, fill in 60, then the phone initiates a probe message within 60 to verify whether the primary server is online. |
Permitted Values | Integer |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Primary Server Detect Interval |
Parameter | DBID_DETECT_MAX_FAILCOUNT |
---|---|
Description | |
Permitted Values | Integer |
Default | 3 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Max Detect Fail Count |
Parameter | DBID_NAT_LEASE_TIME |
---|---|
Description | It configures the interval (in seconds) at which the phone sends a keep-alive package. |
Permitted Values | Integer |
Default | 15 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > NAT Keep-alive Interval (10-60s) |
Parameter | DBID_DNSSRV_ENABLE |
---|---|
Description | It configures the mode of DNS resolution. |
Permitted Values | 0-A Type 1-DNS SRV 2-Auto 3-DNS NAPTR |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Proxy DNS Type |
TIPS:
A Type: a domain name corresponds to an IP address
DNS SRV: one domain name corresponds to multiple server ip addresses
DNS NAPTR: define a new domain name, and specify a certain mode of resolution for the new domain name, and specify the related protocol of the corresponding server
Parameter | DBID_SIP_USE_OBSERVER_IN_DIALOG |
---|---|
Description | It enables or disables the phone to send all SIP requests to the outbound proxy server mandatorily in |
a dialog. | |
Permitted Values | 0-Disabled, only the new SIP request messages from the phone will be sent to the outbound proxy server in a dialog. 1-Enabled, all the SIP request messages from the phone will be sent to the outbound proxy server in a dialog. |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Use OB Proxy in Dialog |
Parameter | DBID_SIP_REGSUBS_ENABLE |
---|---|
Description | It enables or disables the phone to subscribe to the registration state change notifications. |
Permitted Values | 0-Disabled 1-Enabled |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Enable Reg Subscribe |
Parameter | DBID_SIP_REG_SUBSCRIBE_INTERVAL |
---|---|
Description | It configures the time that the IP phone initiates a registration subscription. |
Permitted Values | Integer |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Reg Subscribe Interval (sec) |
Parameter | DBID_DIAL_PREFIX |
---|---|
Description | It configures the prefix of the dialing number. |
Permitted Values | String |
Default | NULL |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Dial Prefix |
Parameter | DBID_HOLD_METHOD |
---|---|
Description | It configures the mode of packets sending when the IP phone uses call hold. |
Permitted Values | 0-ReINVITE 1-INFO |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Hold Method |
Parameter | DBID_SIP_INVITE_USER_CHECK_ENABLE |
---|---|
Description | if it is set to 1, users cannot accept the IP call. |
Permitted Values | 0-Disable 1-Enable |
Default | 1 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Request-URI User Check |
Parameter | DBID_SIP_USE_VPN |
---|---|
Description | It enables or disables the phone to register with VPN account. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > VPN |
Parameter | DBID_SIGNAL_ENCRYPT |
---|---|
Description | It configures the encryption mode of SIP messages transmission. Note: It is generally used for connecting to the VOS platform. |
Permitted Values | 0-Disable 1-N2C 1 2-N2C 2 3-RC4 |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > SIP Encrypt Type |
Parameter | DBID_RTP_ENCRYPT |
---|---|
Description | It configures the encryption mode of RTP messages transmission. Note: It is generally used for connecting to the VOS platform. |
Permitted Values | 0-Disable 1-N2C 1 2-N2C 2 3-CALLID-XOR |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > RTP Encrypt Type |
Parameter | DBID_CALLERID_COUNTRY_CODE |
---|---|
Description | When the phone receives an incoming call, it identifies the country code and automatically deletes it. Note: it works when “DBID_CALLERID_COUNTRY_CODE_REMOVE_ENABLE” is set to Enable. |
Permitted Values | Integer |
Default | Blank |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Country Code |
Parameter | DBID_CALLERID_COUNTRY_CODE_REMOVE_ENABLE |
---|---|
Description | It disable or enable IP phone to identify the country code and automatically delete it |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Remove Country Code |
Parameter | DBID_SIP_TELURL_ENABLE |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Tel URL |
Parameter | DBID_SIP_RANDOM_PORT_ENABLE |
---|---|
Description | It enables or disables the phone to change local SIP port to register again if registration fails. |
Permitted Values | 0-Disable 1-Enable |
Default | 1 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Use Random SIP Port |
Parameter | DBID_SIP_MIN_RANDOM_PORT |
---|---|
Description | It configures the maximum value of the local random SIP port. |
Permitted Values | Integer from 0 to 65535 |
Default | 50000 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Min Random SIP Port |
Parameter | DBID_SIP_RANDOM_PORT_ENABLE |
---|---|
Description | It configures the minimum value of the local random SIP port. |
Permitted Values | Integer from 0 to 65535 |
Default | 60000 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Max Random SIP Port |
Parameter | DBID_SIP_PREFER_PRIMARY_SERVER |
---|---|
Description | If it is set to 1, and the primary server is online normally, the phone immediately switches and registers with the primary server. If the primary server is down and the IP phone is registered on the standby server, the IP phone continuously sends a request to the primary server to check whether it is online. If the primary server is online, the IP phone sends a registration request to the primary server 12 hours later. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Prefer Primary SIP Server |
Parameter | DBID_SIP_REMOVE_ALL_BINDING_ENABLE |
---|---|
Description | It enables or disables the phone to clear the account registration information. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Remove All Bindings |
Parameter | DBID_SIP_USER_TO_USER_HEADER_ENABLE |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > User-To-User |
Parameter | DBID_SIP_USER_TO_USER_CONTENT |
---|---|
Description | |
Permitted Values | String |
Default | Blank |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > UUI Content |
Parameter | DBID_SIP_REMOTE_PARTY_ID_ENABLE |
---|---|
Description | It enables or disables the phone to add the Remote-Party-ID (RPID) header in the initial INVITE message. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > SIP Remote-Party-ID |
Parameter | DBID_SIP_SESSION_ID_ENABLE |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > SIP Session ID Support |
Parameter | DBID_SIP_SYNC_CLOCK_TIME_ENABLE |
---|---|
Description | It enables or disables the phone to get a zero-zone time from the date field in the sip message. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Sync Clock Time |
Parameter | DBID_SIP_CALLEE_ID_HEADER |
---|---|
Description | It configures the identity of the callee. |
Permitted Values | 0-PAID-RPID 1-DAILED 2-RFC4916,the caller sends the SIP request message which contains the from-change tag in the Supported header. The caller then receives an UPDATE message from the server and displays the identity in the “From” header. 3-PAID-RPID-CONTACT 4-RPID-PAID-CONTACT |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Callee ID Header |
Parameter | DBID_SIP_SIPS_SCHEME_ENABLE |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > SIPS Scheme Enable When TLS |
Parameter | DBID_SIP_USE_CONNECTION_PORT |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 1 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > Use Connection Port |
Parameter | DBID_SDP_UNENCRYPTED_SRTCP_ENABLE |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | SIP Account > Line X [1] > Advanced > SIP Advanced Setup > SDP UNENCRYPTED SRTCP Enable |
[1] X is the account ID. X = 1-4
Author:admin Create time:2023-08-29 09:40
Last editor:admin Update time:2024-07-29 16:00
Last editor:admin Update time:2024-07-29 16:00