Telnet is a common method to remotely control Web servers.
The following table lists the parameters you can use to configure the telnet.
Parameter | RemoteTelnet |
---|---|
Description | It enables or disables the telnet feature. |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | Administration > Management > Administrator Settings > Telnet Access > Remote Telnet |
Parameter | TelnetPort |
---|---|
Description | It configures the port used to access the background port of the phone by telnet. |
Permitted Values | Integer |
Default | 23 |
Web UI | Administration > Management > Administrator Settings > Telnet Access > Telnet Port |
Parameter | telnet_allow_ip |
---|---|
Description | It configures the IP address that used to access the Telnet feature. If it is set to “0.0.0.0”, you can use any IP address to access the web user interface of the phone. |
Permitted Values | IP Address |
Default | 0.0.0.0 |
Web UI | Administration > Management > Administrator Settings > Telnet Access > Allowed Remote IP (IP1;IP2;…) |
Parameter | HostName |
---|---|
Description | It configures the user name of the device. |
Permitted Values | String |
Default | FIP13G |
Web UI | Administration > Management > Administrator Settings > Telnet Access > HostName |
Author:admin Create time:2023-08-25 14:35
Last editor:admin Update time:2024-07-29 16:00
Last editor:admin Update time:2024-07-29 16:00