The following table lists the parameters you can use to configure IPv4 wireless network.
Parameter | wireless_wanConnectionMode |
---|---|
Description | It configures the Internet port type for IPv4 wireless network. Note: It works only if “wireless_wan_ipv6_enable” is set to 0 (IPv4) or 1 (IPv4 & IPv6) |
Permitted Values | DHCP, STATIC |
Default | DHCP |
Web UI | Wireless > Wireless > IPv4 Config > Internet Connection Type |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > Mode |
Parameter | wireless_wan_ipaddr |
---|---|
Description | It configures the IPv4 address for the wireless network. Note: It works only if “wireless_wanConnectionMode” is set to STATIC |
Permitted Values | IPv4 Address |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > IP Address |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > IP Address |
Parameter | wireless_wan_netmask |
---|---|
Description | It configures the IPv4 subnet mask for the wireless network. Note: It works only if “wireless_wanConnectionMode” is set to STATIC |
Permitted Values | IPv4 Address |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > Subnet Mask |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > Mask |
Parameter | wireless_wan_gateway |
---|---|
Description | It configures the IPv4 default gateway for the wireless network. Note: It works only if “wireless_wanConnectionMode” is set to STATIC |
Permitted Values | IPv4 Address |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > Default Gateway |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > Gateway |
Parameter | wireless_dns_mode |
---|---|
Description | It triggers the static DNS feature to on or off for the wireless network. Note: It works only if “wireless_wanConnectionMode” is set to DHCP |
Permitted Values | 0-Off, the phone will use the IPv4 DNS obtained from DHCP. 1-On, the phone will use manually configured static IPv4 DNS. |
Default | 0 |
Web UI | Wireless > Wireless > IPv4 Config > DNS Type |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > Static DNS |
Parameter | DBID_WAN_REQUEST_BROADCAST_REPLY |
---|---|
Description | Note: It works only if “wireless_wanConnectionMode” is set to DHCP |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | Wireless > Wireless > IPv4 Config > Request broadcast replies |
Parameter | wireless_wan_primary_dns |
---|---|
Description | It configures the primary IPv4 DNS server for the wireless network. |
Permitted Values | IPv4 Address |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > Primary DNS |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > Pri.DNS |
Parameter | wireless_wan_secondary_dns |
---|---|
Description | It configures the secondary IPv4 DNS server for the wireless network. |
Permitted Values | IPv4 Address |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > Second DNS |
Phone UI | Menu > Advanced > Network > Wi-Fi Port > IPv4 > Sec.DNS |
Parameter | |
---|---|
Description | |
Permitted Values | 0-Disable 1-Enable |
Default | 0 |
Web UI | Wireless > Wireless > IPv4 Config > Auto AP Reconnection |
Parameter | signalSwitch |
---|---|
Description | |
Permitted Values | Integer range from 0 to 100 |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > Reconnection Threshold |
Parameter | sensitivity |
---|---|
Description | |
Permitted Values | Integer |
Default | Blank |
Web UI | Wireless > Wireless > IPv4 Config > sensitivity |
Author:admin Create time:2023-08-23 14:53
Last editor:admin Update time:2024-07-29 16:00
Last editor:admin Update time:2024-07-29 16:00