IPv6 Wired Network Configuration

If you configure the network settings on the phone for an IPv6 wired network, you can set up an IP address for the phone by using PPPoE, DHCPv6 or by manually entering an IP address. Ensure that your network environment supports IPv6. Contact your ISP for more information.

Parameter	wanmode_v6
Description	It configures the Internet port type for IPv6 wired network. Note: It works only if “ipv6_enabled” is set to 1 (IPv4 & IPv6).
Permitted Values	STATIC IPv6 DHCPv6 PPPOE
Default	DHCPv6
Web UI	Network > IPv6 WAN > Connection Type
Phone UI	Menu > Advanced > Network > WAN Port > IPv6 > Mode

Parameter	wan_dhcpv6_addr_settings
Description	Note: : It works only if “wanmode_v6” is set to DHCPv6.
Permitted Values	0-Stateless 1-stateful
Default	0
Web UI	Network > IPv6 WAN > DHCPv6 Address Settings

Parameter	wan_dhcpv6_prefix_delegation
Description	Note: : It works only if “wanmode_v6” is set to DHCPv6.
Permitted Values	0-Disable 1-Enable
Default	0
Web UI	Network > IPv6 WAN > Prefix Delegation

Parameter	wan_ipaddr_v6
Description	It configures the IPv6 address for the wired network. Note: : It works only if “wanmode_v6” is set to STATIC IPv6.
Permitted Values	IPv6 Address
Default	Blank
Web UI	Network > IPv6 WAN > IPv6 Address
Phone UI	Menu > Advanced > Network > WAN Port > IPv6 > IP Address

Parameter	wan_prefix_len_v6
Description	It configures the IPv6 prefix for the wired network. Note: : It works only if “wanmode_v6” is set to STATIC IPv6.
Permitted Values	Integer from 0 to 128
Default	Blank
Web UI	Network > IPv6 WAN > IPv6 Prefix Length

Parameter	wan_gateway_v6
Description	It configures the IPv6 default gateway for the wired network. Note: : It works only if “wanmode_v6” is set to STATIC IPv6.
Permitted Values	IPv6 Address
Default	Blank
Web UI	Network > IPv6 WAN > Default IPv6 Gateway
Phone UI	Menu > Advanced > Network > WAN Port > IPv6 > Gateway

Parameter	wan_primary_dns_v6
Description	It configures the primary IPv6 DNS server for the wired network.
Permitted Values	IPv6 Address
Default	Blank
Web UI	Network > IPv6 WAN > Primary DNS Server
Phone UI	Menu > Advanced > Network > WAN Port > IPv6 > Pri.DNS

Parameter	wan_secondary_dns_v6
Description	It configures the secondary IPv6 DNS server for the wired network.
Permitted Values	IPv6 Address
Default	Blank
Web UI	Network > IPv6 WAN > Secondary DNS Server
Phone UI	Menu > Advanced > Network > WAN Port > IPv6 > Sec.DNS

Parameter	wan_pppoe_opmode
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	KeepAlive On Demand Manual
Default	KeepAlive
Web UI	Network > IPv6 WAN > Operation Mode

Parameter	mwan_pppoe_idle_optime
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	Integer
Default	5
Web UI	Network > IPv6 WAN > Keep Alive Redial Period (0-3600s)

Parameter	mwan_pppoe_service_name
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	Leave empty to resolve this field automatically
Default	Blank
Web UI	Network > IPv6 WAN > Service Name

Parameter
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	Share with IPv4 Create A New PPPoE
Default	Share with IPv4
Web UI	Network > IPv6 WAN > PPPoE Create Method

Parameter
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	Dynamical IP Statical IP
Default	Dynamical IP
Web UI	Network > IPv6 WAN > Address Mode

Parameter
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	String
Default	Blank
Web UI	Network > IPv6 WAN > PPPoE Account

Parameter
Description	Note: : It works only if “wanmode_v6” is set to PPPoE.
Permitted Values	String
Default
Web UI	Network > IPv6 WAN > PPPoE Password

Author：admin Create time：2023-08-23 09:28
Last editor：admin Update time：2024-09-04 13:52