Packet Capture

Procedure

  1. From the web user interface, navigate to Administration > Diagnosis.
  2. Click Start in the Pcap Feature field to start capturing signal traffic.
  3. Reproduce the issue to get stack traces.
  4. Click Stop in the Pcap Feature field to stop capturing.
  5. Click Save to save the file to your local system.
parameter decription
Tracking Interface It configures the interface the captured packet.(WAN port is default)
Filtering Rule The captured packets are filtered.
Upload Packet Enable If it is enabled, captured packets can be saved locally through TFTP,FTP,HTTP, or HTTPS servers, regardless of packet size.
If it is disabled, the default packet saving method is used.
Upload Server It configures the address of the server where the file is uploaded.
User Name It configures the user name of the server.
Password It configures the password of the server.

FXO Capture

parameter decription
FXO Channel It configures the interface the captured packet.
Upload Packet Enable If it is enabled, captured packets can be saved locally through TFTP,FTP,HTTP, or HTTPS servers, regardless of packet size.
If it is disabled, the default packet saving method is used.
Upload Server It configures the address of the server where the file is uploaded.
User Name It configures the user name of the server.
Password It configures the password of the server.

FXO Detection

parameter decription
FXO Channel It configures the interface the captured packet.
FXO Idle Energy(Average)
FXO Get Tone-Format
Ringback Tone Format(on/off)
Busy Tone Format(on/off)
Author:admin  Create time:2023-12-14 14:46
Last editor:admin  Update time:2024-01-03 16:20