This page is the main configuration page of SAS function.
All the correct cases and their detection logic
- Correctly fill in Proxy Server、Outbound Server、Backup Outbound Server, FTA5120 will prioritize detecting the status of Outbound Server, when Outbound Server is fails，it will detect Backup Outbound Server, if both of the Outbound Server fail, FTA5120 will turn to Emergency Mode.
- Fill in Proxy Server only, FTA5120 will detect the status of Proxy Server.
- Fill in Proxy Server and Outbound Server Or Proxy Server and Backup Outbound Server: under the above two situations, FTA5120 will detect the status of Outbound Server (Backup Outbound Server), when the target server fails,FTA5120 will turn to Emergency Mode
The following table lists the parameters you can use to configure the SAS basic Settings.
| Parameter | DBID_SAS_ENABLE |
|---|---|
| Description | It disables or enables the SAS feature. |
| Permitted Values | 0-Disable 1-Enable |
| Default | 1 |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > SAS |
| Parameter | DBID_SAS_PROXY_SERVER |
|---|---|
| Description | It configures the address of server to forward. This will be send to the “Proxy Server” blank of IP Phone when using SIP PnP. |
| Permitted Values | IP Address |
| Default | Blank |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > Proxy Server |
| Parameter | DBID_SAS_PROXY_PORT |
|---|---|
| Description | It configures the port of server. |
| Permitted Values | Integer |
| Default | 5060 |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > Proxy Port |
| Parameter | DBID_SAS_OUTBOUND_PROXY_SERVER |
|---|---|
| Description | It configures the address of outbound proxy server. |
| Permitted Values | IP Address |
| Default | Blank |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > Outbound Server |
| Parameter | DBID_SAS_PNP_CONFIG_ACCOUNT_ENABLE |
|---|---|
| Description | It configures the port of outbound proxy server. |
| Permitted Values | Integer |
| Default | 5060 |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > Outbound Server port |
| Parameter | DBID_SAS_BACKUP_OUTBOUND_PROXY_SERVER |
|---|---|
| Description | It configures the address of backup outbound proxy server. |
| Permitted Values | IP Address |
| Default | Blank |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > Backup Outbound Server |
| Parameter | DBID_SAS_BACKUP_OUTBOUND_PROXY_PORT |
|---|---|
| Description | It configures the port of backup outbound proxy server. |
| Permitted Values | Integer |
| Default | 5060 |
| Web UI | SAS > SAS Configuration > PBX/UC Cloud Configuration > Backup Outbound Port |
| Parameter | DBID_SAS_OPTION_DETECT |
|---|---|
| Description | It configures the timeout period of detecting the status of the PBX. |
| Permitted Values | no-Disable 2000-2000ms 4000-4000ms 6000-6000ms 8000-8000ms 10000-10000ms |
| Default | 4000 |
| Web UI | SAS > SAS Configuration > SIP Configuration > SIP Option Timeout(ms) |
| Parameter | DBID_SAS_OPTION_DETECT_FREQ |
|---|---|
| Description | It configures the timeout interval for detecting status of the PBX |
| Permitted Values | Integer |
| Default | 10 |
| Web UI | SAS > SAS Configuration > SIP Configuration > SIP Option Interval(s) |
| Parameter | DBID_SAS_RECORD_ROUTE |
|---|---|
| Description | It enables or disables carrying routing information in the message header field |
| Permitted Values | on off |
| Default | on |
| Web UI | SAS > SAS Configuration > SIP Configuration > SIP Record Route |
Author：admin Create time：2023-11-27 09:45
Last editor：admin Update time：2024-01-03 16:20
Last editor：admin Update time：2024-01-03 16:20
